String one 6mm Pearl and one 4mm Fire Polished bead.
Using the Daisy Chain technique (photos 1 - 4 above), string eight 3mm Pearls. Pass through the first pearl again. String one 4mm Pearl. Pass back through the fifth bead strung in the circle. You should now see a flower formation.
String one 4mm Fire Polished bead. String one 1mmx1mm Crimp tube. Pass back through the tube, leaving a small loop. Secure using Crimping Pliers. Use Razor Flush Cutters to trim excess wire at the crimp. This is your first flower dangle.
Repeat Steps 1-5 six times, for a total of 7 flower dangles.
Instructions for Necklace::
Use Soft Flex® Flush Cutters to cut about 20 inches of Soft Touch™ Wire from the spool. String one 1mmx1mm crimp tube and one half of the first clasp. Pass back through the tube and secure using Crimping Pliers. Use Flush Cutters to cut off excess wire at the crimp.
String one 4mm Fire Polished bead, one 3mm Pearl, and one 4mm Fire Polished bead.
String eight 3mm Pearls. Pass through the first pearl strung in this step again (using the Daisy Chain technique) to form a circle. String one 4mm Pearl and pass back through the fifth pearl strung in this step. You should now see a flower formation.
Repeat Steps 2 and 3 to form a second flower.
String one 4mm Fire Polished bead, one 6mm Pearl and one 4mm Fire Polished bead.
String eight 3mm Pearls. Pass through the first pearl strung in this step again (using the Daisy Chain technique) to form a circle. String one 6mm Pearl and pass back through the fifth pearl strung in this step. You should now see a larger flower than the first two.
String one 6mm Fire Polished bead, one 6mm Pearl, 1 Flower Dangle and one 6mm Fire Polished bead.
Repeat Step 3, stringing 1 Flower Dangle between the second and third pearls strung.
String one 4mm Fire Polished bead, 1 Flower Dangle, one 4mm Pearl, and one 4mm Fire Polished bead.
Repeat Step 6, stringing one Flower Dangle between the second and third pearls strung.
Repeat Steps 9-4 (reversing the original sequence) to complete the front half of the necklace.
String one 1mmx1mm crimp and the other half of the first clasp. Pass back through the crimp tube and secure using Crimping Pliers. Use Flush Cutters to cut off excess wire at the crimp.
Use Soft Flex® Flush Cutters to cut off 14 inches of Soft Touch™ Wire from the spool. String one 1mmx1mm crimp tube and one half of the second clasp. Pass back through the crimp tube and secure using Crimping Pliers. Use Flush Cutters to cut off excess wire at the crimp.
Using the Ladder Stitch Technique, (photos 1-4 above) string one 6mm Fire Polished bead and one 6mm Pearl. Pass back through the Fire Polished bead, then pass through the Pearl again. You will see a figure 8.
String one Fire Polished bead, then bring the wire back over and through the hole of the previous Pearl, over the Pearl and back through the hole of the Clear bead.
Repeat the pattern in Steps 14 and 15 until desired length has been achieved (13 Fire Polished beads and 12 Pearls were used in the necklace shown). TIP: This section can be worn as a bracelet when detached from the necklace, so a good idea may be to measure the wrist for desired length.
String one 1mmx1mm Crimp tube and the other half of the second clasp. Pass back through the tube and secure using Crimping Pliers. Use Razor Flush Cutters to trim excess wire at the crimp.
Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.
Make your own jewelry with Soft Flex® beading wire. Learn beading tips, get inspired with free beading projects and do your bead shopping all in one place! Browse useful charts and interesting beading articles, get answers to your jewelry-making questions and learn everything you ever wanted to know about gemstone beads. Shop the best quality beading wire, crimps, clasps, beads and gemstones.
Defining Excellence Then and Now - We lead our industry with simply the best products and services. We celebrate our innovative ideas and proudly inspire creativity with our passion to educate. We are dedicated to exceeding the expectations of our customers and are grateful for their continued loyalty.
