Wave Rider Bracelet
Designer Damien Shay

Materials

Soft Flex Wire, Satin Silver .024 Diameter - 9"
7x5mm Lapis Lazuli Barrel Bead - 13 pcs
6mm Blue Howlite Faceted Round Bead - 14 pcs
3mm Sterling Silver Round Bead - 2 pcs
2x2mm Silver Filled Crimp Tube - 2 pcs
1 Strand Sterling Silver Clasp - 1 set

Tools

Regular Crimper
Cutter
Round Nose Pliers
Bead Stopper

Instructions

Finished Size: 8 1/4"

Step 1:
Cut 9" of .024 diameter Soft Flex satin silver colored beading wire and attach a bead stopper to one end and string one sterling silver bead.



Step 2: Then string one howlite and one lapis bead. Continue stringing beads in this order until you have reached the fourteenth strung howlite bead. String one silver bead at the end.



Step 3: Add a 2x2mm crimp tube to the end of the wire. Then string half of the clasp and take the end of the wire and string it back through the crimp tube. Crimp using the regular crimping pliers. Click here for step by step instructions on how to crimp. Next use the cutter and trim the excess wire flush to the crimp tube making sure not to cut the side of the wire with the stringed beads.

Step 4: On the other end of the wire, remove the bead stopper and string a 2x2mm crimp tube and the other half of the clasp, then follow the same directions to crimp and trim.




Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.