Celtic Bead Dangles
Designer Kristen Fagan


Soft Flex Beading Wire, .019 Diameter - 16"
TierraCast 10mm Celtic Beads from Fusion Beads - 2 pcs
4mm Olivine Fire Polished Beads from Fusion Beads - 12 pcs
Silver Spacer Tubes/Beads - 10 pcs
Silver Ear Wires - 1 pair
3x3mm Silver Filled Crimp Tubes - 2 pcs


Mighty Crimping Pliers
Chain Nose Pliers


Step 1:
Cut Soft Flex Beading Wire into two 8" lengths, one for each earring. String Celtic style bead, then crimp tube. Take the other end of the wire make a circle back through the crimp tube for your first loop. Now using the tail that went through the crimp for the loop, string your beads for the second loop. Alternate 1 olivine fire polish bead and 1 silver spacer tube until you have 6 green fire polish beads and 5 spacer tubes. Then take the tail and feed it through the crimp tube again making your second loop.

Step 2: Now take the longer wire tail and feed it through the crimp tube in the opposite direction making a small loop at the top. This little loop will attach to your ear wire. Adjust wires until you are happy with size of all three loops. When ready, use your Mighty Crimping Pliers to close the crimp tube.You use the Mighty Crimping Pliers just like the Regular Crimping Pliers. Click here for crimping instructions.

Step 3: Finally, trim off the excess wire close to the crimp and use your chain nose pliers to attach you ear wire to the top loop. Make your second earring the same way. When making the second earring pay attention to the loop sizes of all three loops before crimping.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.