Wubbers Earrings
Designer Sara Oehler


18ga Non-Tarnish Silver Plated Soft Flex Craft Wire
Beads (optional)
Ribbon (optional)


Medium Bail Making Wubbers Pliers
Nylon Jaw Pliers
Nylon Tipped Hammer


Step 1: Use nylon jaw pliers to straighten the wire. Use the smaller bail on the bail making pliers to create your first loop using the 18 gauge Craft Wire.

Step 2: Place the loop directly above the smaller bail.

Step 3: Use the larger bail to create 1-1/2 loops with 1/2 overlapping.

Step 4: Repeat Steps 2-3, 5 more times for a total of 6 large loops. Trim the excess wire.

Step 5: Work harden the wire piece using a nylon tipped hammer on a hard flat surface (like an anvil) by tapping the wire several times.

Step 6: You can also embellish with ribbons or embellish with beads using 24 gauge Craft Wire.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.