Beaded Wire Wreath Ornament
Designer Sara Oehler

Materials

18ga Non-Tarnish Silver Plated Soft Flex Craft Wire
24ga Non-Tarnish Silver Plated Soft Flex Craft Wire
6-8mm Green Crystal Beads (round or bicone) - 19 pcs

Tools

Round Nose Pliers
Chain Nose Pliers
Cutters
Nylon Jaw Pliers

Instructions

Step 1: Using 18g craft wire, create a wire wrap loop on one end.



Step 2: Shape the wire into a ring by using a round item. I used a Soft Flex beading wire spool. Wrap the wire around the base of the wire wrapped loop and then shape a second ring around the round object.



Step 3: Wrap the wire around the base of the wire wrapped loop and then shape a third ring around the round object.





Step 4: Wrap the wire around the base of the wire wrapped loop. In this case, I took the wire off of the spool and reconnected.



Step 5: Finish the ring by wrapping the wire around the double wrap loop several times.



Step 6: Using a long length of 24g wire, wrap around the wire wrap loop at the base.



Step 7: Wrap the wire around all 3 18g wires. Add a crystal and wrap the wire again. Repeat this 18 times to decorate your wreath with 19 crystals in varying sizes and colors.





Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.