Ornament Hanger
Designer Sara Oehler

Materials

18ga Soft Flex Craft Wire

Tools

Olympus-Lite WigJig
Olympus Super Pegs
Nylon Jaw Pliers
Round Nose Pliers
Nylon Tipped Hammer
Cutters

Instructions

Step 1: If you've never used a WigJig before, you are about to fall in love. The WigJig offers the opportunity to form your craft wire into almost any shape that your heart may desire. In this case, I used one skinny metal peg (comes with the jig) and two super pegs(5/16" and 7/16").



Step 2: When using a WigJig, you will make your first loop with your round nose pliers. Place the loop on the small metal peg. Guide the wire around the larger pegs in an "S" shape as you spin the WigJig. When you turn the jig and guide the wire, the jig will make lovely and fluid lines that can be repeated time and time again.



Step 3: Don't forget the importance of work hardening a design after you pop it off of the WigJig. Work hardening your wire actually changes the molecular structure inside the wire. It is the process of manipulating the wire to lock in the design and stiffen the wire so that your design will stay in place.



Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.