Tranquility Necklace
Designer Sara Oehler

Materials

Tranquility Trios Beading Wire Set (Dark Blue Lapis, Blue Topaz, Tanzanite)
3-strand Clasp - 1 set
2x2mm Crimp Tubes - 150 pcs
3mm Crimp Covers - 150 pcs
3x3mm Crimp Tubes - 6 pcs
4mm Crimp Covers - 6 pcs
10mm Blue Goldstone Beads - 62 pcs
4mm Crystal Beads - 19 pcs
6mm Crystal Beads - 2 pcs
8mm Crystal Beads - 7 pcs

Tools

Crimping Pliers
Mighty Crimping Pliers
Cutters
Chain Nose Pliers

Instructions:

Step 1: Use 20" of Tanzanite beading wire to string one crimp tube. Place the crimp tube about 3” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 2: Continue to add beads to the wire as described in Step 1 leaving 1-1/2” between each crimp. When finished, there should be about 3” of extra wire on either end of the strand and about 7 beads.

Step 3: Use 20" of Tanzanite beading wire to string one crimp tube. Place the crimp tube about 1-1/2” from the end of the wire and crimp, cover with a crimp cover. String one 4mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 4: Continue to add beads to the wire as described in Step 3 leaving 1-3/4” between each crimp. When finished, there should be about 1-1/2” of extra wire on either end of the strand and about 9 beads.

Step 5: Use 20" of Tanzanite beading wire to string one crimp tube. Place the crimp tube about 1-1/2” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-1/2” from the last crimp, cover with a crimp cover. String one 4mm crystal beads, one goldstone bead, one 4mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 6: Continue to add beads to the wire as described in Step 5 leaving 1-1/2” between each crimp. When finished, there should be about 1-1/2” of extra wire on either end of the strand and about 8 sets beads.

Step 7: Use 23" of Blue Topaz beading wire to string one crimp tube. Place the crimp tube about 2” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 8: Continue to add beads to the wire as described in Step 7 leaving 1-1/2” between each crimp. When finished, there should be about 3” of extra wire on either end of the strand and about 9 beads.

Step 9: Use 23" of Blue Topaz beading wire to string one crimp tube. Place the crimp tube about 2-3/4” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 4mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 4mm crystal bead, one goldstone bead, one 4mm crystal beads and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 10: String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 4mm crystal bead, one goldstone bead, one 4mm crystal beads and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 4mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 11: When finished with Steps 9-10, there should be about 3-3/4” of extra wire on either end of the strand and about 8 sets of beads.

Step 12: Use 23" of Blue Topaz beading wire to string one crimp tube. Place the crimp tube about 4” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 6mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 13: Continue to add beads to the wire as described in Step 12 leaving 1-3/4” between each crimp. When finished, there should be about 5” of extra wire on either end of the strand and about 7 beads.

Step 14: Use 23" of Dark Blue Lapis beading wire to string one crimp tube. Place the crimp tube about 1-1/2” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 15: Continue to add beads to the wire as described in Step 14 leaving 1-1/2” between each crimp. When finished, there should be about 2-1/2” of extra wire on either end of the strand and about 9 beads.

Step 16: Use 23" of Dark Blue Lapis beading wire to string one crimp tube. Place the crimp tube about 2” from the end of the wire and crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one 8mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 17: Continue to add beads to the wire as described in Step 16 leaving 1-3/4” between each crimp. When finished, there should be about 3” of extra wire on either end of the strand and about 9 beads.

Step 18: Use 23" of Dark Blue Lapis beading wire to string one crimp tube. Place the crimp tube about 2” from the end of the wire and crimp, cover with a crimp cover. String one 8mm crystal bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover. String one crimp tube and crimp about 1-3/4” from the last crimp, cover with a crimp cover. String one goldstone bead and one crimp tube. Snug the crimp next to the bead and crimp. Cover the crimp with a crimp cover.

Step 19: Continue to add beads to the wire as described in Step 16 leaving 1-3/4” between each crimp. When finished, there should be about 3” of extra wire on either end of the strand and about 9 beads.

Step 20: Use all 3 strands of Tanzanite beading wire to string one 3x3mm crimp tube and half of the clasp. Pass back through the tube. Adjust the wire so that there is about 1” to trim and crimp. Cover the crimp with a 4mm crimp cover. Repeat on the other side.

Step 21: Use all 3 strands of Blue Topaz beading wire to string one 3x3mm crimp tube and half of the clasp. Pass back through the tube. Adjust the wire so that there is about 1” to trim and crimp. Cover the crimp with a 4mm crimp cover. Repeat on the other side.

Step 22: Use all 3 strands of Dark Blue Lapis beading wire to string one 3x3mm crimp tube and half of the clasp. Pass back through the tube. Adjust the wire so that there is about 1” to trim and crimp. Cover the crimp with a 4mm crimp cover. Repeat on the other side.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.