Go With the Flow Jewelry
Designer Jamie Hogsett

Skill Level Beginner

Materials

Tranquility Trios Beading Wire Set (Dark Blue Lapis, Blue Topaz, Tanzanite)
12mm Silver Plated Lobster Clasps - 5 pcs
6mm Sterling Silver Soldered Jump Rings – 5 pcs
2x2mm Silver Filled Crimp Tubes - 60 pcs
8mm Lapis Rounds from Jewelry Televison - 15 pcs
8x10mm Faceted Iolite Ovals from Jewelry Televison - 15 pcs

Tools

Cutters
Crimping Pliers

Instructions

Finished Size 7" (each bracelet)

Step 1: Use 4" of Dark Blue Lapis wire to string 1 crimp tube and 1 jump ring. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp. Use the wire to string 1 Iolite oval and 1 crimp tube. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp.

Step 2: Use 4" of Dark Blue Lapis wire to string 1 crimp tube and the previous wire loop. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp. Use the wire to string 1 Lapis round and 1 crimp tube. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp.

Step 3: Use 4" of Dark Blue Lapis wire to string 1 crimp tube and the previous wire loop. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp. Use the wire to string 1 Iolite oval and 1 crimp tube. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp.

Step 4: Repeat Steps 2 and 3.

Step 5: Use 4" of Dark Blue Lapis wire to string 1 crimp tube and the previous wire loop. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp. Use the wire to string 1 Lapis round, 1 crimp tube, and 1 clasp. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp.

Step 6: Repeat Steps 1-5 using Turquoise Blue Topaz wire.

Step 7: Repeat Steps 1-5 using Tanzanite wire.

Step 8: Use 4" of Tanzanite wire to string 1 crimp tube and 1 jump ring. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp. Use the wire to string 1 Lapis round and 1 crimp tube. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp.

Step 9: Use 4" of Turquoise Blue Topaz wire to string 1 crimp tube and the previous wire loop. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp. Use the wire to string 1 Iolite oval and 1 crimp tube. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp.

Step 10: Use 4" of Dark Blue Lapis wire to string 1 crimp tube and the previous wire loop. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp. Use the wire to string 1 Lapis round and 1 crimp tube. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp.

Step 11: Use 4" of Tanzanite wire to string 1 crimp tube and 1 jump ring. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp. Use the wire to string 1 Iolite oval and 1 crimp tube. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp.

Step 12: Use 4" of Turquoise Blue Topaz wire to string 1 crimp tube and 1 jump ring. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp. Use the wire to string 1 Lapis round and 1 crimp tube. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp.

Step 13: Use 4" of Dark Blue Lapis wire to string 1 crimp tube and the previous wire loop. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp. Use the wire to string 1 Iolite oval, 1 crimp tube, and 1 clasp. Pass back through the tube, leaving a wire loop about 1/4" long, and crimp.

Step 14: Repeat Steps 8-13 to make a second multi-color bracelet.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.