Quartz Dangles
Designer Jamie Hogsett

Skill Level Beginner

Materials

Garnet Soft Flex Beading Wire .019 diameter - 12"
2x2mm Sterling Silver Crimp Tubes - 8 pcs
3mm Sterling Silver Crimp Covers - 8 pcs
Silver Plated Ear Wires - 1 pair
20x12mm Clear Quartz Simple Cut Nuggets - 4 pcs

Tools

Cutters
Crimping Pliers
Chain Nose Pliers

Instructions

Finished Size: 2 1/4"



Step 1: Use 3" of beading wire to string 1 crimp tube. Pass back through the tube, forming a small loop of wire. Crimp the crimp tube. Trim the wire end. Cover the crimp tube with 1 crimp cover.



Step 2: String 1 quartz nugget and 1 crimp. Snug the crimp bead close to the bead, and crimp.



Step 3: Cover the crimp tube with 1 crimp cover. Trim the wire end.



Step 4: Use 3" of beading wire to string 1 crimp tube and the loop of wire formed in Step 1. Pass back through the tube, forming a small loop of wire. Crimp the crimp tube, trim the wire end, and cover the crimp tube with 1 crimp cover.



Step 5: String 1 quartz nugget and 1 crimp tube. Pass back through the tube, leaving a small loop of wire. Crimp the crimp tube, trim the wire end, and cover the crimp tube with 1 crimp cover.



Step 6: Attach 1 ear wire to the previous loop of beading wire.

Step 7: Repeat Steps 1-6 for the second earring.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.