Fall Colors Necklace
Designer Jamie Hogsett

Skill Level Intermediate-Advanced

Materials

Bone Soft Flex Beading Wire .019 diameter
Butterscotch Imperial Topaz Soft Flex Beading Wire .019 diameter
Red Jasper Soft Flex Beading Wire .019 diameter
Chrysoprase Soft Flex Beading Wire .019 diameter
24 gauge Non-Tarnish Silver Soft Flex Craft Wire
16mm Thai Silver Etched Toggle Clasp from Artbeads - 1 set
3x3mm Sterling Silver Crimp Tubes - 2 pcs
10x13mm Thai Silver Leaf Charms from Artbeads - 6 pcs
13x30mm Olivine Swarovski Crystal Navette Pendant from Artbeads - 1 pc
5mm Olivine Swarovski Crystal Bicones from Artbeads - 6 pcs
5mm Khaki Swarovski Crystal Bicones from Artbeads - 6 pcs
5mm Lime Swarovski Crystal Bicones from Artbeads - 6 pcs
5mm Peridot Swarovski Crystal Bicones from Artbeads - 6 pcs
12x16mm Picasso Turquoise Czech Pressed Glass Drops from Artbeads - 4 pcs
3mm Gold Luster Green Tea Magatama Seed Beads from Artbeads - 8 grams
3mm Matte Dark Olive Magatama Seed Beads from Artbeads - 8 grams

Tools

3-Pin Knitting Spool with Stylus
Cutters
Mighty Crimping Pliers
Speeder Beader (to fit .019 beading wire)
Bead Stoppers

Instructions

Step 1: Working directly from the wire spool, use the Bone wire to string {1 Gold Luster Green Tea Magatama and 1 Matte Dark Olive Magatama} 200 times.

Step 2: Working directly from the wire spools, use the Bone wire, the Butterscotch Imperial Topaz wire, the Red Jasper wire, and the knitting spool to knit an 18" cord, following Style 3 of the Knitting Spool instructions, adding 2 Magatamas to every other stitch, and leaving 3" tails. Place Bead Stoppers on the wire ends.

Step 3:
Use 40" of Chrysoprase wire to string 1 Matte Dark Olive Magatama, 1 Gold Luster Green Tea Magatama, and 1 Matte Dark Olive Magatama to the center of the wire. Use both wire ends to string the Olivine Navette pendant. Place a Bead Stopper on one end of the wire.



Step 4:
Use the other end of the wire to string the Speeder Beader. Position the Navette pendant so that it's at the center of the knitted wire cord. Use the Speeder Beader to pass the Chrysoprase wire though the center of the knitted cord, to exit the back of the cord. Pass the wire back through to the front of the cord about 1/2" to the right of center.

Step 5: Remove the Speeder Beader, string 1 Khaki crystal bicone, and replace the Speeder Beader. Pass through to the back of the knitted cord about 1/4" from the previous pass-through. Pass back through to the front of the knitted cord about 1/4" from the previous pass-through.

Step 6: Remove the Speeder Beader, string 1 Gold Luster Green Tea Magatama, 1 Matte Dark Olive Magatama, 1 charm, 1 Matte Dark Olive Magatama, and 1 Gold Luster Green Tea Magatama, and replace the Speeder Beader. Pass through to the back of the knitted cord about 1/4" from the previous pass-through. Pass back through to the front of the knitted cord about 1/4" from the previous pass-through.

Step 7: Repeat Step 5 using 1 Peridot crystal bicone.

Step 8: Remove the Speeder Beader, string 1 Czech glass drop, and replace the Speeder Beader. Pass through to the back of the knitted cord about 1/4" from the previous pass-through. Pass back through to the front of the knitted cord about 1/4" from the previous pass-through.

Step 9: Repeat Step 5 using 1 Lime crystal bicone. Repeat Step 6. Repeat Step 5 using 1 Olivine crystal bicone. Repeat Step 8. Repeat Step 5. Repeat Step 6. Repeat Step 5 using 1 Peridot crystal bicone. Repeat Step 5 using 1 Lime crystal bicone. Repeat Step 5 using 1 Olivine crystal bicone. Repeat Step 5. Repeat Step 5 using 1 Peridot crystal bicone. Repeat Step 5 using 1 Lime crystal bicone. Repeat Step 5 using 1 Olivine crystal bicone.

Step 10: Continue weaving the Chrysoprase wire back and forth through the knitted cord until it reaches the end of the cord. Remove the Bead Stopper from the knitted cord wire ends. Use the ends of all four wire colors to string 1 crimp tube and one half of the clasp; pass back through the tube and crimp.

Step 11:
Remove the Bead Stopper placed in Step 3. Repeat Steps 4-10 for the other half of the necklace.



Step 12:
Working directly from the wire spool, use the 24-gauge wire to string {1 Gold Luster Green Tea Magatama and 1 Matter Dark Olive Magatama} 27 times. Wrap the wire end around the center of the knitted cord to the right of the Navette pendant. Wrap the wire around the knitted cord several times for 1/4". Wrap back toward the pendant, moving Magatamas up into the wrap so that they cluster at the front of the necklace. Wrap the wire around to the other side of the pedant and repeat entire step. Trim wire from the spool and tuck wire ends into the wrap.



Step 13:
Working directly from the wire spool, use the 24-gauge wire to string {1 Gold Luster Green Tea Magatama and 1 Matter Dark Olive Magatama} 22 times. Wrap the wire end around the knitted cord to the inside of the crimped tube. Wrap the wire back and forth across the crimp tube to cover the tube. Wrap the wire over the knitted cord, away from the clasp, for about 3/4". Wrap the wire back and forth the 3/4", adding beads to the wrap so that they are scattered around the knitted cord. Trim wire from the spool and tuck wire ends into the wrap. Repeat entire step for the other end of the necklace.




Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.