Daisy Earrings
Designer Sara Oehler

Skill Level Beginner

Materials

Turquoise Soft Flex Beading Wire .019 diameter - 20"
Chrysoprase Soft Flex Beading Wire .019 diameter - 6"
2x2mm Sterling Silver Crimp Tubes - 14 pcs
Silver Ear Wires - 1 pair

Tools

Wire Cutters
Crimping Pliers

Instructions

Step 1: Use 10" of beading wire to string one crimp tube.

Step 2: Pass back through the tube to form a small loop of wire. Do not crimp the crimp tube.

Step 3: String one crimp tube. Pass the wire through the loop formed in Step 2 then back through the crimp tube. Adjust the wire to create a petal about 15mm in diameter.



Step 4:
Repeat Step 3 three times.









Step 5:
To create the fifth petal, pass the wire through the first crimp used in Step 2.

Step 6: Crimp all the crimp tubes and cut off excess wire.

Step 7: Use 1 1/2" of beading wire (in a different color than already used) to string one crimp tube. Pass the wire through the center of two of the petals. Pass through the crimp tube again to form a 5mm ring. Crimp the crimp tube and cut off excess wire.

Step 8: Repeat Step 7.

Step 9: Attach 1 ear wire to one of the petals.

Step 10: Repeat Steps 1-9 to create a second earring.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.