Buddha Bracelet
Designer Jamie Hogsett

Skill Level Beginner

Materials

925 Sterling Silver Soft Flex Extreme Wire .019 diameter
11mm x 18mm Silver-Plated Toggle Clasp - 1 pcs
2mm x 2mm Sterling Silver Crimp Tubes - 6 pcs
3mm Sterling Silver Crimp Covers - 6 pcs
10mm x 13mm Silver-Plated Buddha Bead - 1 pc
4mm Light Amethyst Swarovski Elements Crystal Round Beads - 21 pcs
6mm x 4mm Dark Indigo Swarovski Elements Crystal Rondelle Beads - 5 pcs

Tools

Cutters
Bead Crimping Pliers

Instructions

Finished Size: 7 1/4"


Step 1: Cut three 10" pieces of wire.

Step 2: Use all three wires to string 1 crimp tube 2" from the ends. Crimp the tube. Cut two short wire ends. Cover the crimp tube with a crimp cover. Use the remaining wire end to string 1 crimp tube and the bar half of the clasp set. Pass back through the tube and crimp. Cut the wire tail. Cover the crimp tube with a crimp cover.

Step 3: Use 1 wire to string 1 round bead. Repeat using the other two wires.

Step 4: Use all three wires to string 1 rondelle bead. Adjust the rondelle so that there is 3/4" between the rondelle and the crimp cover.

Step 5: Repeat Step 3.

Step 6: Use all three wires to string 1 rondelle bead. Adjust the rondelle so that there is 3/4" between the rondelle and the previous rondelle.



Step 7: Repeat Step 3 and Step 6 three times.



Step 8: Use all three wires to string 1 crimp tube. Adjust the crimp tube so that there is 3/4" between the crimp tube and the previous rondelle. Crimp the tube. Do not cut any wires. Cover the crimp tube with a crimp cover. Use all three wires to string the Buddha bead and1 crimp tube. Snug the beads and crimp the tube. Do not cut any wires. Cover the crimp tube with a crimp cover.

Step 9: Repeat Step 3. Repeat Step 4. Repeat Step 3.



Step 10: Repeat Step 2 using the ring half of the clasp set and placing the first crimp tube 3/4" from the previous rondelle.




Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.