Golden Glow and Chocolate Truffle Necklace
Designer Jamie Hogsett

Skill Level Intermediate

Materials

Citrine .019 Diameter Soft Flex Beading Wire
16mm 18K Gold Plated Toggle Clasp with Topaz Crystals - 1 pc
2mm x 2mm Gold Filled Crimp Tubes - 20 pcs
3mm Gold Filled Crimp Covers - 20 pcs
1.5 inch 24 Gauge Gold Filled Head Pins - 20 pcs
4mm Gold Filled Soldered Jump Rings - 9 pcs
6mm Citrine CZ Faceted Rondelles - 47 pcs
23x13mm Gold Olive Tagua Nut Beads - 2 pcs
23x13mm Dark Brown Olive Tagua Nut Beads - 2 pcs
20x13mm Dark Brown Diamond Cut Tagua Nut Beads - 2 pcs
24mm Henna/Light Yellow/Antique Gold Jambo Kazuri Beads - 2 pcs
24mm Light Yellow/Henna/Antique Gold/Orange Pita Pat Benin Splash Kazuri Beads - 2 pcs

Tools

Chain Nose Pliers
Round Nose Pliers
Flat Nose Pliers
Cutters
Crimping Pliers

Instructions

Finished Size: 17"


Step 1: Use 1 head pin to string 1 CZ and form a wire wrapped loop that attaches to 1 jump ring. Repeat twice, attaching all three head pins to the same jump ring. Set aside.

Step 2: Repeat Step 1 eight times, for a total of 9 jump ring clusters.



Step 3: Use 4" of Citrine wire to string 1 crimp tube and the ring half of the toggle clasp. Pass back through the tube and crimp. Cover the tube with a crimp cover. Use the wire to string 1 CZ rondelle, 1 dark brown olive, 1 CZ rondelle, 1 crimp tube, and 1 jump ring cluster. Pass back through the tube and crimp. Cover the tube with a crimp cover.

Step 4: Use 4" of Citrine wire to string 1 crimp tube and the previous jump ring cluster. Pass back through the tube and crimp. Cover the tube with a crimp cover. Use the wire to string 1 CZ rondelle, 1 gold olive, 1 CZ rondelle, 1 crimp tube, and 1 jump ring cluster. Pass back through the tube and crimp. Cover the tube with a crimp cover.

Step 5: Use 4" of Citrine wire to string 1 crimp tube and the previous jump ring cluster. Pass back through the tube and crimp. Cover the tube with a crimp cover. Use the wire to string 1 CZ rondelle, 1 diamond cut bead, 1CZ rondelle, 1 crimp tube, and 1 jump ring cluster. Pass back through the tube and crimp. Cover the tube with a crimp cover.

Step 6: Use 4" of Citrine wire to string 1 crimp tube and the previous jump ring cluster. Pass back through the tube and crimp. Cover the tube with a crimp cover. Use the wire to string 1 CZ rondelle, 1 Jambo bead, 1CZ rondelle, 1 crimp tube, and 1 jump ring cluster. Pass back through the tube and crimp. Cover the tube with a crimp cover.

Step 7: Use 4" of Citrine wire to string 1 crimp tube and the previous jump ring cluster. Pass back through the tube and crimp. Cover the tube with a crimp cover. Use the wire to string 1 CZ rondelle, 1 Pita Pat Benin Splash bead, 1CZ rondelle, 1 crimp tube, and 1 jump ring cluster. Pass back through the tube and crimp. Cover the tube with a crimp cover.

Step 8: Repeat Step 6. Repeat Step 7.

Step 9: Repeat Step 5. Repeat Step 4.



Step 10: Use 4" of Citrine wire to string 1 crimp tube and the previous jump ring cluster. Pass back through the tube and crimp. Cover the tube with a crimp cover. Use the wire to string 1 CZ rondelle, 1 dark brown olive, 1CZ rondelle, 1 crimp tube, and the bar half of the clasp. Pass back through the tube and crimp. Cover the tube with a crimp cover.




Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.