Fireworks Earrings
Designer Jamie Hogsett

Skill Level Beginner

Materials

Fireworks Trios Beading Wire Set (Dark Blue Lapis, Red Coral, White Quartz)
Sterling Silver Ear Wires - 1 pair
8mm Sterling Silver Window Beads - 2 pcs
1.5" Sterling Silver 22-gauge Eye Pins - 2 pcs
1x1mm Sterling Silver Crimp Tubes - 12 pcs
2x2mm Sterling Silver Crimp Tubes - 6 pcs
3mm Sterling Silver Crimp Covers - 6 pcs
3mm Red Fire-Polished Glass Rounds - 4 pcs
4-6mm Assorted Red Czech Pressed-Glass Beads - 7 pcs

Tools

Chain Nose Pliers
Round Nose Pliers
Cutters
Crimping Pliers

Instructions

Finished Size: 3 1/2"

Step 1: Attach 1 eye pin to 1 ear wire. Use the eye pin to string 1 fire-polished round, the first hole of 1 window bead, 1 pressed-glass bead, the second hole of the window bead, and 1 fire-polished round. Form a wire wrapped loop.

Step 2: Use 4" of Red Coral wire to string the wire wrapped loop formed in Step 1. Use both ends of the Red Coral wire to string one 2mm crimp tube. Push the tube up toward the wire wrapped loop until there is a small loop of wire remaining, and crimp. Cover the tube with a crimp cover. *Use one end of the wire to string 1 pressed-glass bead and 1 micro crimp. Place the bead in its desired location on the wire and use chain-nose pliers to flatten the micro crimp. Repeat from * for the other end of the wire.

Step 3: Repeat Step 3 using 3 1/2" of Dark Blue Lapis wire.

Step 4: Repeat Step 3 using 3" of White Quartz wire.

Step 5: Repeat Steps 1-4 to make the second earring.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.