24K Gold Bangles
Designer Jamie Hogsett

Skill Level Beginner

Materials

Extreme Flex Wire .014 Diameter 24K Gold - 36"
Extreme Flex Wire .019 Diameter 24K Gold - 36"
3mm x 3mm Sterling Silver Crimp Tubes - 2 pcs
4mm Gold Filled Crimp Covers - 2 pcs
4.5mm Gold Filled Jump Ring - 1 pc
1.5" 22-gauge Gold Filled Head Pins - 3 pcs
4mm Montana Crystallized Swarovski Elements Rounds - 12 pcs
6mm Montana Crystallized Swarovski Elements Cubes - 2 pcs
8mm Montana Crystallized Swarovski Elements Round - 1 pc

Tools

Chain Nose Pliers
Round Nose Pliers
Cutters
Mighty Crimpers
Bead Stoppers

Instructions

Finished Size: 2 3/4"


Step 1: Use 1 head pin to string 1 cube and form a wire wrapped loop. Repeat using the other cube. Repeat using the 8mm round. Attach the jump ring to all three wire wrapped loops. Set aside.

Step 2: Cut three 12" pieces of .014 diameter wire. Attach a Bead Stopper to one end of each wire. Use all three wires to string 1 crimp tube. Braid the wires together for about 2 1/4". Use 1 wire to string the jump ring from Step 1. Continue braiding the wires together for about 6".



Step 3: Pass the wire ends through the crimp tube again, so that the wires form a circle. Attach a Bead Stopper to the wires. Place the bangle over your hand and make sure it fits around the widest part of the hand. Once it's the correct diameter, crimp the crimp tube. Remove the Bead Stoppers, trim the wire ends, and cover the crimp tube with a crimp cover.

Step 4: Cut three 12" pieces of 019 diameter wire. Attach a Bead Stopper to one end of each wire. Use all three wires to string 1 crimp tube. Use the middle wire to string twelve 4mm rounds. Place a Bead Stopper on the end of this wire. *Braid the wires for about 1/2" and slide 1 crystal round up into the braid. Repeat from * eleven times. Braid the wires for about 1/2".



Step 5: Repeat Step 3.




Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.