Grecian Horseshoe Necklace
Designer Jamie Hogsett

Skill Level Intermediate

Materials

20ga Pacific Blue Silver Plated Soft Flex Craft Wire
32x8mm Sterling Silver Hook and Eye Clasp - 1 set
Oval and Round Textured Copper Chain - 4 pcs
Oval and Round Textured Silver Plated Chain - 7 pcs
Oval and Round Textured Gold Plated Chain - 4 pcs
3mm Swarovski Elements Crystal Moonlight Rounds - 16 pcs

Tools

Cutters
Metal Punch Pliers
Chain Nose Pliers
Flat Nose Pliers
Round Nose Pliers

Instructions

Finished Size: 17 1/4"


Step 1: Use heavy duty cutters to cut four round links from the copper chain (The oval links will remain intact and can be used for other projects.) Repeat to cut four round links from the gold plated chain. Repeat to cut seven links from the silver plated chain.

Step 2: Use heavy duty cutters to cut away a piece, 3/8" wide (inner diameter) and 1/2" wide (outer diameter), of 1 copper chain link. Repeat with all the copper, gold plated, and silver plated chain links.

Step 3: Use the Metal Punch Pliers to punch a hole in both corners of all links.

Step 4: Use 2" of wire to form a wire wrapped loop that attaches to the hook half of the clasp. String 1 crystal round and form a wire wrapped loop that attaches to one hole of 1 silver link.

Step 5: Use 2" of wire to form a wire wrapped loop that attaches to the other hole of the previous link.

Step 6: String 1 crystal round and form a wire wrapped loop that attaches to one hole of 1 copper link.

Step 7: Repeat Steps 5 and 6 twice. Repeat Step 5.

Step 8: String 1 crystal round and form a wire wrapped loop that attaches to one hole of 1 silver link.

Step 9: Repeat Steps 5 and 6 once. Repeat Steps 5 and 8 three times. Repeat Step 5.

Step 10: String 1 crystal round and form a wire wrapped loop that attaches to one hole of 1 gold link.



Step 11: Repeat Steps 5 and 8 once. Repeat Steps 5 and 10 three times. Repeat Steps 5 and 8 once.

Step 12: Use 2" of wire to from a wire wrapped loop that attaches to the other hole of the previous link. String 1 crystal round and form a wrapped loop that attaches to the eye half of the clasp.




Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.