Easy-Peasy Sparkle Earrings
Designer Jamie Hogsett

Skill Level Beginner

Materials

Vitality Trios Beading Wire Set (Butterscotch Imperial Topaz, Citrine, Red Jasper)
11x3mm Sterling Silver 3-hole Spacer Tubes - 2 pcs
Sterling Silver Floret Ear Wires - 1 pair
3x3mm Sterling Silver Crimp Tubes - 2pcs
4mm Sterling Silver Crimp Covers - 2 pcs
3mm Crystallized Swarovski Elements Crystal Moonlight rounds - 22 pcs

Tools

Cutters
Mighty Crimpers
Bead Stoppers

Instructions

Finished Size: 3 1/4"

Step 1: Cut two 8" pieces of Butterscotch Imperial Topaz wire. Cut two 8" pieces of Citrine wire. Cut two 8" pieces of Red Jasper wire.

Step 2: Place a Bead Stopper on the end of one Butterscotch Imperial wire. Use the wire to string 5 crystal rounds, the middle hole of 1 spacer, and 5 crystal rounds. Attach the previous Bead Stopper to both wire ends.

Step 3: Place a Bead Stopper on the end of one Citrine wire. Use the wire to string 3 crystal rounds, the right hole of 1 spacer, and 3 crystal rounds. Attach the previous Bead Stopper to both wire ends.

Step 4: Place a Bead Stopper on the end of one Red Jasper wire. Use the wire to string 3 crystal rounds, the left hole of 1 spacer, and 3 crystal rounds.

Step 5: Remove Bead Stoppers. Hold all six wire ends together and use them to string 1 crimp tube. Adjust the wires so that one group of ends is about two inches longer than the other. Use the longer wire ends to string 1 ear wire. Pass all three wire ends back through the crimp tube. Adjust the wires and crimp. Trim wire ends. Cover the crimp tube with a crimp cover.

Step 6: Repeat Steps 2-5 for the second earring.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.