Circus Bracelet
Designer Jamie Hogsett

Skill Level Beginner

Materials

Copper Color Soft Flex Metallics Beading Wire .019 diameter
Peridot Soft Flex Beading Wire .019 diameter
Pink Rhodochrosite Soft Flex Beading Wire .019 diameter
2x2mm Sterling Silver Crimp Tubes - 18 pcs
3mm Sterling Silver Crimp Covers - 18 pcs
14mm Double AB Jet Marea Czech Glass Beads - 6 pcs

Tools

Cutters
Crimping Pliers

Instructions

Step 1: Use two 6" pieces of Copper Color wire to string 1 crimp tube. Pass both wires back through the tube, leaving a good-sized loop, and crimp. Trim the short wire tails. Cover the crimp tube with a crimp cover. Use both wires to string 1 glass bead and 1 crimp tube. Pass both wires back through the tube, leaving a loop the same size as the previous loop, and crimp. Trim the wire tails. Cover the tube with a crimp cover. Repeat entire step twice more, for a total of three copper links.

Step 2: Use two 6" pieces of Pink Rhodochrosite wire to string 1 crimp tube and 1 loop of one copper link. Pass both wires back through the tube, leaving a good-sized loop, and crimp. Trim the short wire tails. Cover the crimp tube with a crimp cover. Use both wires to string 1 glass bead, 1 crimp tube, and 1 loop of a second copper link. Pass both wires back through the tube, leaving a loop the same size as the previous loop, and crimp. Trim the wire tails. Cover the tube with a crimp cover.

Step 3: Repeat Step 2, attaching the first Pink Rhodochrosite loop to the second loop of the second copper link and the second Pink Rhodochrisite loop to one loop of the third copper link. Repeat Step 2 again, attaching the first and third copper links.

Step 4: Use 2" of Peridot wire to pass through the connections of the copper and pink links, making sure to pass through both the copper and pink wire loops. Use one end of the Peridot wire to string 1 crimp tube. Use the other end of the wire to pass through the crimp tube in the opposite direction. Pull the wire ends until the Peridot wire forms about a 10mm ring, and crimp. Cover the crimp tube with a crimp cover.



Step 5: Repeat Step 4 four times, once for each connection of copper and pink links.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.