Spring Spinel

Designer Jamie Hogsett
Skill Level Beginner
Click to print instructions

Materials

Garnet Soft Flex Beading Wire .019 - 20"
White Quartz Soft Flex Beading Wire .019 - 20"
925 Sterling Silver Soft Flex Extreme Beading Wire .019 - 20"
925 Sterling Silver Soft Flex Extreme Beading Wire .014 - 30"
Sterling Silver Flower and Leaf Hook and Eye Clasp - 1 set
13mm Sterling Silver 3-Hole Round Connector - 6 pcs
2mm x 2mm Sterling Silver Crimp Tubes - 12 pcs
3mm Sterling Silver Crimp Covers - 4 pcs
3mm Multi-Colored Spinel Rondelles - 150 pcs

Tools

Cutters
Chain Nose Pliers
Crimping Pliers

Instructions

Finished Size: 18 1/4"

Step 1: Use 10" of 925 Sterling Silver .014 diameter wire to string 1 crimp tube and the second top hole of 1 connector. Place the tube at the very end of the wire and flatten using chain nose pliers. The crimp should hide behind the connector.

Step 2: String 9 rondelles and two top holes of 1 connector four times. String 9 rondelles and the first top hole of 1 connector. String 1 crimp tube, snug the beads, and crimp. The crimp should hide behind the connector.

Step 3: Repeat Steps 1 and 2 using the second holes of the connectors.

Step 4: Repeat Steps 1 and 2 using the third holes of the connectors and stringing 12 rondelles between connectors.



Step 5: Use 20" of Garnet wire, 20" of White Quartz wire, and 20" of 925 Sterling Silver .019 diameter wire together to string the open middle hole of the connector used in Step 1 and 1 crimp tube. Place the tube at the very end of the wires and crimp using crimping pliers. The crimp should hide behind the connector.



Step 6: Use the other ends of all three wires to string 1 crimp tube. Place the tube so that it is 5 1/2" of wire between the crimp and the connector, and crimp. Do not cut the Garnet wire. Trim the White Quartz and the 925 Sterling Silver wires at the crimp tube. Cover the tube with a crimp cover. Use the Garnet wire to string 1 crimp tube and one half of the clasp. Pass back through the tube and crimp. Trim the wire end at the crimp tube. Cover the tube with a crimp cover.



Step 7: Repeat Steps 5 and 6 for the other half of the necklace.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is
given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction
of this project as a result of improper safety precautions.