Daggers and Dangles
Designer Jamie Hogsett

Skill Level Beginner

Materials

Chrysoprase Soft Flex Beading Wire .019 - 15"
Fluorite Soft Flex Beading Wire .019 - 15"
Green Turquoise Soft Flex Beading Wire .019 - 15"
26mm Thai Silver Toggle Clasp - 1 set
7x13mm Thai Silver Cones - 2 pcs
2mm x 2mm Sterling Silver Crimp Tubes - 4 pcs
3mm Sterling Silver Crimp Tubes - 2 pcs
6x8mm Wasabi Silk Czech Glass Small Petal - 15 pcs
8x11mm Turquoise Silk Czech Glass Small Spade - 15 pcs
5x15mm Wasabi Luster Czech Glass Dagger - 11 pcs
8x18mm Turquoise Silk Czech Glass Duckbill - 12 pcs

Tools

Cutters
Crimping Pliers
Bead Stoppers

Instructions



Step 1: Use the Chrysoprase wire to string 1 duckbill. Place the duckbill about 3" from one end of the wire,then use the long end of the wire to pass through the duckbill again. *String 1 dagger,1 spade,1 petal,and 1 duckbill. Place the duckbill about 1" from the previous duckbill and pass through the duckbill again. String 1 petal,1 spade,1 dagger,and 1 duckbill. Place the duckbill about 1" form the previous duckbill and pass through the duckbill again. Repeat from * once. Set aside.

Step 2: Place 1 Bead Stopper on the Fluorite wire about 3" from one wire end. String 1 dagger,1 spade,1 petal,and 1 duckbill. Pass the wire through the duckbill again. *String 1 dagger,1 spade,1 petal,and 1 duckbill. Place the duckbill about 1" from the previous duckbill and pass the wire through the duckbill again. Repeat from * twice. String 1 dagger,1 spade,and 1 pearl. Place a Bead Stopper on the wire end.

Step 3: Place 1 Bead Stopper on the Green Turquoise wire about 3" from one wire end. String 1 spade,1 petal,and 1 duckbill. Pass the wire through the duckbill again. *String 1 petal,1 spade,1 dagger,1 spade,1 petal,and 1 duckbill. Place the duckbill about 1 1/2" from the previous duckbill and pass through the duckbill again. Repeat from * once. String 1 petal and 1 spade.

Step 4: Remove 1 Bead Stopper from the Fluorite wire.

Step 5: Use one end of each wire together to string 1 crimp tube. Place the tube about 1/4" from the beads on the wires,and crimp. Cut the ends of the Chrysoprase and Fluorite wires,but do not cut the Green Turquoise wire. Use the Green Turquoise wire to string 1 cone,1 crimp tube,and one half of the clasp. Make sure the cone is right next to the beads,then pass the Green Turquoise wire back through the crimp tube,and crimp. Cover the tube with a crimp cover.

Step 6: Remove remaining Bead Stoppers. Repeat Step 5 using the other half of the clasp.






Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.