Chain Link Bracelet
Designer Jamie Hogsett

Skill Level Beginner

Materials

Oval and Round Silver Plated Textured Copper Chain - 5 oval links
Oval and Square Textured Copper Chain - 6 oval links
Two Strand Sterling Silver Flat Oval Toggle - 1 set
5mm Sterling Silver Jump Rings - 28 pcs

Tools

Metal Punch Pliers
Chain Nose Pliers
Flat Nose Pliers

Instructions

Finished Size: 7 1/2"

Step 1: Use cutters to cut round links of chain in order to remove entire oval links. Cut enough for 5 silver links and 6 copper links.

Step 2: Use the metal punch pliers to punch four holes in each link: two on each long side of the oval, making sure to punch the holes in about the same spots on each link.

Step 3: Use 2 jump rings (one per hole) to attach the ring half of the clasp to 1 copper link.

Step 4: Use 2 jump rings to attach the copper link to 1 silver link. Use 2 jump rings to attach the silver link to 1 copper link.

Step 5: Repeat Step 4 four times.

Step 6: Form two chains of 3 jump rings each. Attach one end of each chain to the final copper link. Attach the other end of each chain to the bar half of the clasp.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.