Extreme CZ Earrings
Designer Jamie Hogsett

Skill Level Beginner

Materials

925 Sterling Silver Plated Soft Flex Extreme Beading Wire .019 diameter
2x2mm Sterling Silver Crimp Tubes - 6 pcs
Sterling Silver Ear Wires - 1 pair
13x5mm Pewter Bead Caps - 2 pcs
4x2mm Orange CZ Faceted Rondelles - 10 pcs
11x15mm Green Aventurine Faceted Tear Drops - 2 pcs

Tools

Crimping Pliers
Cutters

Instructions

Finished Size: 2 1/8"

Step 1: Use 6" of wire to string 1 green aventurine tear drop to the center of the wire. Use both wire ends to string 1 bead cap (wide end first) and 1 crimp tube. Snug the bead cap and the crimp tube, and crimp. Do not cut any wires.

Step 2: Use 1 wire to string 2 orange CZ rondelles. Use the other wire to string 2 orange CZ rondelles. Use both wires to string 1 crimp tube. Adjust the rondelles so that they alternate on the two wire strands, then crimp tube crimp tube. Cut one of the wire tails.

Step 3: Use the remaining wire tail to string 1 CZ rondelle, 1 crimp tube, and the loop of 1 ear wire; pass back through the tube and crimp. Trim the wire end.

Step 4: Repeat Steps 1-3 for the second earring.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.