Pearl Party
Designer Shelley Richey

Skill Level Beginner


Extreme 925 Sterling Silver .014 Diameter Soft Flex Wire - 14"
Sterling Silver Ear Wires - 1 pc
2mm x 2mm Sterling Silver Crimp Tubes - 2 pcs
1mm x 1mm Sterling Silver Crimp Tubes - 8 pcs
White 6mm Rice Pearls - 8 pcs


Regular Crimping Pliers
Flush Cutters
Micro Crimping Pliers


Step 1: Cut the wire into two 3 inch pieces and two 4 inch pieces.

Step 2: Use one 3 inch wire and one 4 inch wire to string one 2mm x 2mm crimp tube and 1 ear wire. Pass back through the tube, but do not crimp. Adjust the wires so that the ends of the wires all fall in a different spot. Crimp the crimp tube.

Step 3: Use 1 end of the wire to string 1 pearl and one 1mm x 1mm crimp tube. Place the crimp tube at the very end of the wire and crimp. Repeat entire step three times so that there is 1 pearl on each wire end.

Step 4: Repeat Steps 2 and 3 to make a second earring.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.