|
Instructions:
- Use 10 inches of wire to string one 2mm silver round bead, the crystal round bead, one 2mm silver round bead, and one 1mm x 1mm crimp tube. Place the tube at the very end of the wire and crimp.
- Use the other end of the wire to string one 2mm x 2mm crimp tube and 1 ear wire. Pass back through the crimp tube, but do not crimp.
- String one 3mm silver round bead, one 4mm silver round bead, the quartz crystal teardrop, one 4mm silver round bead, and one 3mm silver round bead. Pass through the crimp tube again, but do not crimp.
- Adjust the wires so that there is a small loop of wire on the top of the earring and a large loop of wire on the top of the earring, with the crystal round bead dangling in the center. Crimp the crimp tube.
- Repeat Steps 1-4 to make a second earring.
Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions. |
