Double Drop
Designer Shelley Richey
Skill Level Beginner

Materials

925 Sterling Silver Plated Soft Flex Extreme Beading Wire .019 diameter - 20"
Sterling Silver Leverback Ear Wires - 1 pair
2x2mm Sterling Silver Crimp Tubes - 2 pcs
3mm Sterling Silver Crimp Covers - 2 pcs
4mm Sterling Silver Round Beads - 2 pcs
5mm Sterling Silver Round Beads - 2 pcs

Tools

Crimping Pliers
Cutters
Mighty Crimping Pliers

Instructions

Step 1: Use 10" of wire to string 1 ear wire to the center of the wire. Use both ends of wire to string 1 crimp tube, but do not crimp.

Step 2: Use one end of the wire to string one 4mm round bead. Pass back through the crimp tube, but do not crimp. Use the other end of the wire to string one 5mm round bead. Pass back through the crimp tube, but do not crimp.

Step 3: Adjust both wire ends, so that the loop of wire with the 5mm bead is longer than the loop of wire with the 4mm bead. Once the loops are adjusted, crimp the crimp tube. Trim the wire ends and cover the crimp tube with a crimp cover. Use the Mighty Crimping Pliers to close the crimp cover.

Step 4: Repeat Steps 1-3 to make a second earring.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.