Kiss Me! I'm Irish!
Designer Jamie Hogsett

Skill Level Intermediate

Materials

Trios Kiss Me! I'm Irish! wire set (Green Emerald, Peridot, Fluorite)
22mm Gold 5-Strand Box Clasp - 1 set
2mmx2mm Gold-Filled Crimp Tubes - 18 pcs
3mm Gold-Filled Crimp Covers - 9 pcs
22-Gauge Gold-Filled Head Pins - 18 pcs
Ecru-lined Crystal AB Japanese Size 11 Seed Beads - 9 pcs
6mm Crystallized Swarovski Elements Cantaloupe Bicones - 21 pcs
13mm Vintage Hard Plastic Kelly Green 5-Petal Flowers - 18 pcs
8mm Vintage Lucite Muted Light Lavender Moonglow Side-Drilled Button Rounds - 24 pcs
8mm Vintage Lucite Opaque Jonquil Rounds - 9 pcs
9x16mm Vintage Lucite Emerald Moonglow Tear Drops - 6 pcs
22mm Vintage Lucite Emerald Moonglow Rounds - 3 pcs
20x41mm Vintage German Lucite Matte Deep Mint Leaf Pendants - 3 pcs

Tools

Cutters
Crimping Pliers
Magical Crimping Pliers

Instructions



Step 1: Cut 21 1/2" of Green Emerald wire, Peridot wire, and Fluorite wire.

Step 2: Use all three wires to string 1 crimp tube, 1 tear drop (wide end first), 3 Lavender Moonglow button rounds, 1 tear drop (narrow end first), and 1 crimp tube.

Step 3: Move the beads to the center of the wires and crimp both crimp tubes using Magical Crimp Forming Pliers.

Step 4: Use one end of the Green Emerald wire to string 1 crystal bicone. Repeat using the Peridot and Fluorite wires.

Step 5: Repeat Step 2. Place the first crimp tube string so that it is 2" from the previous crimp tube, and crimp using Magical Crimp Forming Pliers. Snug the beads and crimp the other crimp tube. Repeat Step 4. Use all three wires to string 1 crimp tube. Place the tube 3 5/8" from the previous tube and crimp using Magical Crimp Forming Pliers. Trim the Peridot and Fluorite wires. Use the remaining Green Emerald wire to string 1 crimp tube and the inside loop of one half of the clasp. Pass back through the tube and crimp using Bead Crimping Pliers. Cover the tube with a crimp cover.

Step 6: Repeat Step 4 using the other ends of the wires. Repeat Step 5.



Step 7: Use 1 head pin to string 1 seed bead, 1 Jonquil Round, and one 5-Petal Flower. Form a wire wrapped loop. Repeat eight times to make a total of nine Jonquil dangles. Use 1 head pin to string 1 Bicone and one 5-Petal Flower. Form a wire wrapped loop. Repeat eight times to make a total of nine Bicone dangles.

Step 8: Cut 24" of Green Emerald wire, Peridot wire, and Fluorite wire. Use all three wires to string 1 Lavender Moonlight Button Round to 5 1/2" from the ends of the wires. *String 1 Bicone dangle, 1 Jonquil dangle, and 1 Bicone dangle. Pass through the Lavender Moonlight Button Round again. Use all three wires to string 1 Lavender Moonlight Button Round so that it is about 2" from the previous Button Round. String 1 Jonquil dangle, 1 Bicone dangle, and 1 Jonquil dangle. Pass through the Button Round again. Use all three wires to string 1 Lavender Moonlight Button Round so that it is about 2" from the previous Button Round. Repeat from * twice.

Step 9: Use all three wires to string 1 crimp tube. Place the tube 3 1/2" from the last Button round and crimp using Magical Crimp Forming Pliers. Trim the Green Emerald and Fluorite wires. Use the remaining Peridot wire to string 1 crimp tube and the middle loop of one half of the clasp. Pass back through the tube and crimp using Bead Crimping Pliers. Cover the tube with a crimp cover. Repeat entire step using the other ends of the wires.



Step 10: Cut 26 1/2" of Green Emerald wire, Peridot wire, and Fluorite wire. * Use all three wires to string 1 crimp tube, 1 Leaf Pendant, 1 Emerald Moonlight Round, 3 Lavender Moonlight Button rounds, and 1 crimp tube. Center the beads on the wire and crimp both tubes using Magical Crimp Forming Pliers. Use Bead Crimping Pliers to place a crimp cover over the crimp tube next to the Button Round, to keep the bead from slipping over the crimp tube. Repeat from * once, placing and crimping the first crimp tube 2 1/2" from the previous tube.

Step 11: Use the other ends of the wire to string 1 crimp tube, 3 Lavender Moonlight Button Rounds, 1 Green Emerald Moonlight Round, 1 Leaf Pendant, and 1 crimp tube. Place the first crimp tube 2 1/2" from the first crimp tube strung in Step 10 and crimp using Bead Crimping Pliers. Cover the tube with a crimp cover. Snug the beads and crimp the other crimp tube using Magical Crimp Forming Pliers.

Step 12: Use all three wires to string 1 crimp tube. Place the tube 5 1/2" from the next crimp tube and crimp using Magical Crimp Forming Pliers. Trim the Green Emerald and Peridot wires. Use the remaining Fluorite wire to string 1 crimp tube and the outside loop of one half of the clasp. Pass back through the tube and crimp using Bead Crimping Pliers. Cover the crimp tube with a crimp cover. Repeat entire step using the other ends of the wires.




Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.