Econo Lampwork Necklace
Designed by: Sara Hardin
Skill Level: Beginner

Materials:

• Econoflex Wire, .014 Diameter - 15 feet
• Toggle clasp
• 3mm x 3mm Sterling Silver Crimp Tubes - 2 crimps
• Lampwork Pendant or Bead

Tools:

• Mighty Crimping Pliers
• Cutters

Instructions:

1. Cut the wire into ten 18" pieces (Use one color, or mix and match different colors.). Use all 10 strands of wire to string 1 crimp tube and the toggle. Pass back through the tube and crimp.

2. String all 10 strands through the lampwork pendant or bead.

3. There should be about 17" of exposed wire. Use all 10 strands of wire to string 1 crimp tube and the toggle. Pass back through the tube and crimp. Cut off excess wire.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.