Extreme Floral Necklace
Designer Jamie Hogsett
Skill Level Beginner

Materials

Extreme Trios Beading Wire Set (24K Gold Plated, 925 Sterling Silver Plated, Champagne)
Sterling Silver Elegant Toggle Clasp - 1 set
Sterling Silver 3 Hole Connector with Flower - 4 pcs
Sterling Silver 3 Hole Connector with Daisy - 3 pcs
2x2mm Sterling Silver Crimp Tubes - 44 pcs
3x3mm Sterling Silver Crimp Tubes - 2 pcs
3mm Sterling Silver Crimp Covers - 4 pcs

Tools

Crimping Pliers
Cutters
Mighty Crimper

Instructions

Step 1: Cut three 2 3/4" 24K Gold Plated wires. Use all three wires to string the bottom hole of 1 daisy connector and one 2mm x 2mm crimp tube. Place the tube at the very end of the wires and crimp. Use the other ends of the wires to string 1 flower connector and one 2mm x 2mm crimp tube. Place the tube at the very end of the wires and crimp.

Step 2: Repeat Step 1 using three 2 1/2" 925 Sterling Silver Plated wires and the middle holes of the connectors.

Step 3: Repeat Step 1 using three 2 1/4" Champagne wires and the top holes of the connectors.

Step 4: Cut three 2 3/8" wires: one 24K Gold Plated wire, one 925 Sterling Silver Plated wire, and one Champagne wire. Use all three wires to string the bottom hole of the other half of the flower connectors used in Step 1. String one 2mm x 2mm crimp tube. Place the tube at the very end of the wires and crimp. Use the other ends of the wires to string 1 daisy connector and one 2mm x 2mm crimp tube. Place the tube at the very end of the wires and crimp.

Step 5: Repeat Step 4 using 2 1/4" wires and the middle holes of the connectors.

Step 6: Repeat Step 4 using 2 1/8" wires and the top holes of the connectors.



Step 7: Cut three 2 3/8" 24K Gold Plated wires. Use all three wires to string the bottom hole of the other half of the daisy connector used in Step 4. String one 2mm x 2mm crimp tube. Place the tube at the very end of the wires and crimp. Use the other ends of the wires to string 1 flower connector and one 2mm x 2mm crimp tube. Place the tube at the very end of the wires and crimp.

Step 8: Repeat Step 7 using three 2 1/4" 925 Sterling Silver Plated wires and the middle holes of the connectors.

Step 9: Repeat Step 7 using three 2 1/8" Champagne wires and the top holes of the connectors.

Step 10: Cut three 2" 24K Gold Plated wires, three 2" 925 Sterling Silver Plated wires, two 2" Champagne wires, and one 4" Champagne wire.

Step 11: Use one wire of each color (no matter the length) to string the bottom home of the other half of the flower connector used in Step 7. String one 2mm x 2mm crimp tube. Place the tube at the very ends of the wires and crimp. Repeat for the other two holes of the connector. Gather all nine wires together and use them to string one 3mm x 3mm crimp tube. Place the tube at the very ends of the 2" wires and crimp. Cover the tube with a crimp cover. Use the 4" wire to string one 2mm x 2mm crimp tube and one half of the clasp. Pass back through the tube, crimp, and cover with a crimp cover.

Step 12: Repeat Steps 1 to 11 for the other half of the necklace. When repeating Step 1, be sure to use the same daisy connector initially used in Step 1.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.