Circles of Love Choker
Designer Jamie Hogsett

Skill Level Beginner

Materials

Trios Mystical (Spinel,Pink Tourmaline, Amethyst)
Trios Romance (Quartz, Rhodochrosite, Garnet)
18K Gold Plated Toggle Clasp with Clear Austrian Crystal - 1 set
2mm x 2mm Gold Filled Crimp Tubes - 12 pcs
4.5mm Gold Filled Open Jump Rings - 2 pcs
4mm Clear CZ Faceted Rondelles - 11 pcs
7x5mm Clear CZ Faceted Briolettes - 12 pcs

Tools

Crimping pliers
Cutters
Chain Nose pliers

Instructions

Step 1: Use 5" of Amethyst wire to string 1 rondelle and 1 crimp tube. Pass through the tube, forming about a 30mm loop. Use the tail end of wire to string 1 briolette. Pass through the crimp tube again, forming a small 10mm loop of wire below the 30mm loop. Crimp the tube and trim the tail ends of wire (you should have very short tail ends, so you'll only be recycling about 2mm of wire from each tail end.)

Step 2: Cut 5" of Spinel wire. Pass through the rondelle used in the previous step. Repeat Step 1.

Step 3: Repeat Step 2 using Rhodochrosite wire.

Step 4: Repeat Step 2 using Quartz wire.

Step 5: Repeat Step 2 using Garnet wire.

Step 6: Repeat Step 2 using Pink Tourmaline wire.

Step 7: Repeat Steps 1 through 5.

Step 8: Repeat Step 6, omitting stringing the rondelle.

Step 9: Use 1 jump ring to attach one half of the clasp to the Amethyst loop formed in Step 1.

Step 10: Use 1 jump ring to attach one half of the clasp to the Pink Tourmaline loop formed in Step 8.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.