Serenity Earrings
Designed by: Jamie Hogsett
Skill Level: Beginner

Materials:

• Trios™ Serenity wire set (Bone, Green Turquoise, Flourite)
• 2mm x 2mm Soft Flex® Sterling Silver Seamless Crimp Tubes - 6 crimps
• 3mm x 3mm Soft Flex® Sterling Silver Seamless Crimp Tubes - 2 crimps
• Sterling Silver Ear Wires - 1 pair
• 5mm Sterling Silver Open Jump Rings - 2 jump rings
• 2 inch 24 gauge Sterling Silver Eye Pins - 2 eye pins
• 9mm Sterling Silver Bead Caps - 2 bead caps
• 3mm Blue Turquoise Rondelles - 8 rondelles
• 6mm Green Turquoise Squares - 2 squares
• 3x6mm Green Fluorite Cylinders - 4 cylinders
• 11x16mm Green Aventurine Faceted Tear Drops - 2 drops
• 11x16mm Unakite Tear Drops - 2 drops
• 7x9mm Swiss Blue CZ Faceted Briolettes - 2 briolettes
• 4mm Champagne CZ Faceted Rondelles - 2 rondelles

Tools:

• Crimping Pliers
• Mighty Crimpers
• Cutters
• Chain Nose Pliers
• Round Nose Pliers

Instructions:

1. Use 1 eye pin to string 1 Green Fluorite cylinder, 1 bead cap, and 1 Blue Turquoise rondelle. Form a wire wrapped loop that attaches to 1 ear wire.

2. Use 2 1/2" of Bone wire to string one 2mm x 2mm crimp tube and 1 Unakite drop. Pass back through the tube, leaving a loose loop of wire around the drop, and crimp. String 1 Blue Turquoise rondelle and 1 Green Flourite cylinder. Set aside.

3. Use 2 1/2" of Green Turquoise wire to string 2mm x 2mm crimp tube and 1 Swiss Blue CZ briolette. Pass back through the tube, leaving a loose loop of wire around the drop, and crimp. String 1 Champagne CZ rondelle and 1 Blue Turquoise rondelle. Set aside.

4. Use 2 1/2" of Fluorite wire to string one 2mm x 2mm crimp tube and 1 Green Aventurine drop. Pass back through the tube, leaving a loose loop of wire around the drop, and crimp. String 1 Blue Turquoise rondelle and 1 Green Turquoise square. Set aside.

5. Use the free ends of each wire to string one 3mm x 3mm crimp tube and 1 jump ring. Pass back through the tube, leaving a loose loop of wire and placing each wire so that the drops are somewhat even in length, and crimp.

6. Attach the jump ring to the eye pin.

7. Repeat Steps 1 to 6 for the second earring.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.