Romance Earrings
Designed by: Jamie Hogsett
Skill Level: Beginner

Materials:

Tools:

Instructions:

  1. Use 1 head pin to string 2 Garnet stones and form a wire wrapped loop. Use 1 head pin to string 1 Rhodocrosite rectangle and form a wire wrapped loop. Use 1 head pin to string 1 Rhodocrosite oval and form a wire wrapped loop.

  2. Use 3" of Quartz wire to string one 2mm x 2mm crimp tube and the Garnet stone wire wrapped loop. Pass back through the tube and crimp. String 1 Rose Quartz nugget. Set aside.

  3. Use 4" of Rhodocrosite wire to string one 2mm x 2mm crimp tube and the Rhodocrosite rectangle wire wrapped loop. Pass back through the tube and crimp. String 1 Quartz matte nugget. Set aside.

  4. Use 5" of Garnet wire to string one 2mm x 2mm crimp tube and the Rhodocrosite oval wire wrapped loop. Pass back through the tube and crimp. String 1 Quartz polished nugget. Set aside.

  5. Use the free ends of all three wires to string one 3mm x 3mm crimp tube and 1 jump ring. Pass back through the tube, wasting as little wire as possible, and crimp.

  6. Attach the jump ring to 1 ear wire.

  7. Repeat Steps 1 to 6 for the second earring.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.