Renewal Earrings
Designer Jamie Hogsett
Skill Level Beginner



Materials

Trios Renewal wire set (Peridot, Emerald, Chrysoprase)
12x12mm-12x20mm Emerald Simple Cut Stone - 2 pcs
5x3mm Peridot Faceted Rondelle - 10 pcs
9mm x 10mm Sterling Silver Square Bead - 2 pcs
1x1mm Sterling Silver Crimp Tube - 6 pcs
3x3mm Sterling Silver Crimp Tube - 2 pcs
Sterling Silver Ear Wires - 1 pair
2" 24 gauge Sterling Silver Eye Pin - 2 pcs

Tools

Micro Crimper
Mighty Crimper
Cutters
Chain Nose Pliers
Round Nose Pliers

Instructions



Step 1: Attach 1 ear wire to 1 eye pin. Use the eye pin to string 1 Peridot rondelle, 1 Sterling Silver bead, 1 Peridot rondelle, and 1 Emerald stone. Form a wire wrapped loop.

Step 2: Cut 4" of Peridot wire, 3" of Emerald wire, and 3 1/2" of Chrysoprase wire. Use all three wires to string one 3mm x 3mm crimp tube and the wire wrapped loop formed in Step 1. Center the loop on the wires and pass all three wires back through the crimp tube, and crimp.

Step 3: Use one end of the Peridot wire to string 1 Peridot rondelle and one 1mm x 1mm crimp tube. Crimp the tube about 1mm from the end of the wire.

Step 4: Repeat Step 3 using one end of the Emerald wire. Repeat Step 3 using one end of the Chrysoprase wire.

Step 5: Repeat Steps 1 to 4 for the second earring.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.