Mystical Earrings
Designer Jamie Hogsett
Skill Level Beginner


Materials

Mystical Trios Beading Wire Set (Spinel, Pink Tourmaline, Amethyst)
22x10mm Sterling Silver Grape Connectors - 2 pcs
2x2mm Sterling Silver Crimp Tubes - 2 pcs
Sterling Silver Ear Wires - 1 pair
10x7mm Pink Tourmaline Carved Leaves - 4 pcs
9x5mm Amethyst Matte Pebbles - 4 pc
12mm Amethyst Simple Cut Stones - 2 pc

Tools

Crimping Pliers
Cutters

Instructions



Step 1: Use 2 1/2" of Spinel wire to string 1 crimp tube and 1 ear wire. Pass back through the tube and crimp. String 1 Amethyst stone, 1 crimp tube, and the top loop of one connector. Pass back through the tube and crimp.

Step 2: Use 2 1/2" of Amethyst wire to string 1 crimp tube and the bottom loop of the connector. Pass back through the tube and crimp. String 1 Amethyst pebble, 1 crimp tube, and 1 Pink Tourmaline leaf. Pass back through the tube, placing it so that there is about 1/4" of wire between the top crimp tube and the Amethyst pebble, and a loose loop of wire around the Pink Tourmaline leaf, and crimp.

Step 3: Use 4" of wire to string 1 crimp tube and the bottom circle of the connector. Pass back through the tube and crimp. String 1 Amethyst pebble, 1 crimp tube, and 1 Pink Tourmaline leaf. Pass back through the tube, placing it so that there is about 1/2" of wire between the top crimp tube and the Amethyst pebble, and a very loose loop of wire around the Pink Tourmaline leaf, and crimp.

Step 4: Repeat Steps 1 to 3 for the second earring, making sure to flip the direction of the connector so that the earrings are mirror images of each other.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.