Harmony Earrings
Designed by: Jamie Hogsett
Skill Level: Beginner

Materials:

• Trios™ Harmony wire set (Bone, Lemon Quartz, Copper)
• 14kt Gold Ear Wires - 1 pair
• 6mm Gold Plated Finish Topaz Austrian Crystal Squardelles - 2 squardelles
• 2mm x 2mm Gold Filled Crimp Tubes - 6 crimp tubes
• 2 inch 24 Gauge Gold Filled Head Pin - 2 head pins
• 5mm Copper Rice Pearls - 2 pearls
• 15mm Lemon Citrine Faceted Nuggets - 2 nuggets
• 20-25mm Lemon Quartz Smooth Nuggets - 2 nuggets

Tools:

• Crimping Pliers
• Cutters
• Bead Stoppers

Instructions:

1. Use 3" of Bone wire to string 1 crimp tube to the center of the wire. Pass one end back through the crimp tube and pass the other end back through the tube in the opposite direction, forming a figure 8. Crimp the tube, wasting as little wire as possible.

2. Repeat Step 1 using Lemon Quartz wire. Repeat Step 1 using copper wire.

3. Use 1 head pin to string 1 Lemon Citrine nugget, 1 pearl, 1 squardelle, and 1 Lemon Quartz nugget. Form a wire wrapped loop that attaches to the bottom loop of all three wires.

4. Attach 1 ear wire to the top loop of all three wires.

5. Repeat Step 1 to 4 for the second earring.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.