Elegant Earrings
Designer Jamie Hogsett
Skill Level Beginner



Materials

Elegant Trios Beading Wire Set (Copper Color, Coral, Onyx)
2x2mm Copper Crimp Tubes - 16 pcs
Antiqued Copper Ear Wire with Coil - 1 pair
3mm Copper Lantern Beads - 4 pcs
18-22mm Baroque Coin Pearls - 2 pcs
6x9mm Black Spinel Faceted Drops - 2 pcs
8x5mm Black Tourmaline Faceted Ovals - 4 pcs
6x4mm Red Coral Natural Beads - 4 pcs

Tools

Crimping Pliers
Cutters
Bead Stoppers

Instructions



Step 1: Cut 4" of Copper Color wire. Use both ends of the wire to string 1 crimp tube. Place the tube so there is a small loop of wire, and crimp. Use one end of the wire to string 1 Coral bead and 1 crimp tube. Place the tube so there is about 1/8" to 1/4" of tail wire and crimp. Use the other end of the wire to string 1 Black Tourmaline oval and 1 crimp tube. Place the tube so there is about 1/8" to 1/4" of tail wire, and crimp.

Step 2: Repeat Step 1 using Coral wire.

Step 3: Use 5" of Onyx wire to string 1 crimp tube and 1 ear wire. Pass back through the tube, leaving a small loop, and crimp.

Step 4: Use the working end of the wire to string 1 copper lantern bead, 1 pearl, 1 copper lantern bead, 1 crimp tube, the loop formed in Step 1, 1 Black Spinel drop, and the loop formed in Step 2. Pass the very end of the Onyx wire back through the crimp tube and crimp, leaving a large loop of Onyx wire beneath the pearl.

Step 5: Repeat Steps 1 to 4 for the second earring.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.