Braided Napkin Ring
Designer Jamie Hogsett

Skill Level Beginner

Materials

Econoflex wire .019 dia in Steel Blue - 27"
Econoflex wire .019 dia in Spring Green - 27"
3mm x 3mm Sterling Silver Crimp Tubes - 3 pcs
22mm blue and gold shiny palm tree glass button

Tools

Mighty Crimper
Soft Flex Professional Flush Cutters

Instructions



Step 1: Cut the wire into 9" pieces, for a total of 3 Steel Blue wires and 3 Spring Green wires.

Step 2: Use all six wires to string 1 crimp tube. Place the tube about 3/4" from one end of the wires, and crimp.

Step 3: Divide the wires into three groups of one Steel Blue wire and one Spring Green wire. Braid the three groups until there is about 1" of wire remaining. Use all six wires to string 1 crimp tube, and crimp.

Step 4: Trim half of the tail ends on both sides of the braid, so that there are three wires remaining. Use one side of the tail ends to string the button and 1 crimp tube. Use the other tail ends to pass through the crimp tube and the button. Snug the ring and crimp the tube.




Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.