Tranquility Necklace
Designed by: Jamie Hogsett
Skill Level: Intermediate

Materials:

• Trios™ Tranquility wire set (Tanzanite, Lapis, Blue Topaz)
• 2mm x 2mm Soft Flex Sterling Silver Seamless Crimp Tubes - 19 tubes
• 3mm x 3mm Soft Flex Sterling Silver Seamless Crimp Tubes - 7 tubes
• 5x7mm Blue Kyanite Barrels - 24 barrels
• 10x12mm Lapis Rectangles - 7 rectangles
• 4mm translucent pale blue Czech glass rounds - 21 rounds
• 9mm pale blue Czech glass twisted rounds - 6 rounds

Tools:

• Mighty Crimpers
• Crimping Pliers
• Cutters

Finished Size: 29 1/2"

Instructions:

1. Cut thirteen 4" pieces of Tanzanite wire. Repeat with the Lapis wire. Cut fifteen 4" pieces of Blue Topaz wire.

2. Use 1 piece of each color wire to string one 3mm x 3mm crimp tube. Use each wire to string one 4mm Czech glass round. Use all the wires to pass through the tube again to form a ring, trying to waste as little wire as possible. Crimp the tube. Repeat six times to form a total of seven triple rings.

3. Use 1 piece of Tanzanite wire to string one 2mm x 2mm crimp tube and one 9mm Czech glass twisted round. Pass through one triple ring, then pass through the tube again, and crimp.

4. Use 1 piece of Lapis wire to string one 2mm x 2mm crimp tube and 4 Kyanite barrels. Pass through the previous ring, then pass through the tube again, and crimp.

5. Use 1 piece of Blue Topaz wire to string one 2mm x 2mm crimp tube and 1 Lapis rectangle. Pass through the previous ring and one triple ring, then pass through the tube again, and crimp.

6. Repeat Step 3, passing through the previous triple ring. Repeat Steps 4 and 5. Repeat entire step.

7. Use 1 piece of Blue Topaz wire to string one 2mm x 2mm crimp tube and 1 Lapis rectangle. Pass through the previous triple ring, then pass back through the tube again, and crimp.

8. Use 1 piece of Lapis wire to string one 2mm x 2mm crimp tube and 4 Kyanite barrels. Pass through the previous ring, then pass through the tube again, and crimp.

9. Use 1 piece of Tanzanite wire to string one 2mm x 2mm crimp tube and one 9mm Czech glass twisted round. Pass through the previous ring and one triple ring, then pass through the tube again, and crimp.

10. Repeat Steps 7-9 twice.

11. Use 1 piece of Blue Topaz wire to string one 2mm x 2mm crimp tube and 1 Lapis rectangle. Pass through the previous triple ring and the first triple ring (used in Step 3). Pass through the tube again and crimp.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.