Sophisticated Necklace
Designer Jamie Hogsett
Skill Level Intermediate

Materials

Trios Sophisticated wire set (Antique Brass, Onyx, Coral)
12mm Sterling Silver Toggle Clasp - 1 set
5mm Sterling Silver Jump Rings - 2 pcs
2mm x 2mm Soft Flex Sterling Silver Seamless Crimp Tubes - 28 pcs
24x7mm Sterling Silver Filigree Connector - 8 pcs
25x10mm Sterling Silver Filigree Drop - 7 pcs
6x4mm Bronze Freshwater Pearl Tear Drops - 19 pcs
10x4mm Black Tourmaline Twisted Rectangles - 2 pcs
6x4mm Red Coral Natural Beads - 4 pcs
14mm Red Sponge Coral Squares - 6 pcs

Tools

Chain Nose Pliers
Crimping Pliers
Cutters

Instructions

Finished size: 17 3/4"



Step 1: Use 3" of Coral wire to string 1 crimp tube. Pass back through the tube, forming a small loop, and crimp. String 1 Coral bead, 1 crimp tube, and the hole in the round end of 1 filigree drop. Pass back through the tube and crimp. Repeat entire step three times for a total of four Coral dangles.

Step 2: Use 3" of Antique Brass wire to string 1 crimp tube. Pass back through the tube, forming a small loop, and crimp. String 1 Black Tourmaline twisted rectangle, 1 crimp tube, and the hole in the pointed end of 1 filigree drop. Pass back through the tube and crimp. Repeat entire step for a total of two Antique Brass dangles.

Step 3: Use 5" of Onyx wire to string 1 crimp tube. Pass back through the tube, forming a small loop, and crimp. String 3 Pearls, 1 crimp tube, and the hole in the round end of 1 filigree drop. Pass back through the tube and crimp.

Step 4: Use 6" of Coral wire to string 1 crimp tube and one end of 1 filigree connector. Pass back through the tube and crimp. String 2 Pearls, 1 Coral dangle, 2 Pearls, 1 Antique Brass dangle, 2 Pearls, 1 Coral dangle, 2 Pearls, the Onyx dangle, 2 Pearls, 1 Coral dangle, 2 Pearls, 1 Antique Brass dangle, 2 Pearls, 1 Coral dangle, 2 pearls, 1 crimp tube, and one end of 1 filigree connector. Pass back through the tube and crimp.

Step 5: Use 3" of Onyx wire to string 1 crimp tube and the other end of 1 filigree connector used in the previous step. String 1 Coral square, 1 crimp tube, and one end of 1 filigree connector. Pass back through the tube and crimp.



Step 6: Repeat Step 5 using Coral wire and attaching the first loop to the other end of the previous filigree connector.

Step 7: Repeat Step 5 using Antique Brass wire and attaching the first loop to the other end of the previous filigree connector.

Step 8: Use 1 jump ring to attach the other end of the final connector to one half of the clasp.

Step 9: Repeat Steps 5-8 for the other half of the necklace, using the other half of the clasp.