Simply Elegant Necklace
Designer Virginia Magdaleno

Skill Level Beginner


20 Gauge Soft Flex Craft Wire Gold - 1 spool
Squaredelle Toggle - 1 set
6mm Fire Polished Beads - 31 pcs


Soft Flex Flush Cutters
Soft Flex Round Nose Pliers
Soft Flex Chain Nose Pliers


Step 1: Use Soft Flex Professional Flush Cutters to cut 2.5 inches of wire from the spool. Form a wire wrapped loop that attaches to the first loop of one half of the clasp. String 1 bead and form a wire wrapped loop. Cut off any access wire.

Step 2: Repeat 12 times, attaching each additional link to previous link. (make sure you add the previous link before you close the loop - I've done this silly thing several times).

Step 3: Cut 4 inches of wire, form wire wrapped loop (add the previous link), add 2 beads - make loop, wrap twice, then coil wire around the two beads, and wrap at opposite end.

Step 4: Cut 5 inches of wire, form loop, add 3 beads- make loop, wrap twice, coil around the three beads, wrap at opposite end (cut off any excess wire).

Step 5: Repeat #3.

Step 6: Repeat #2.

Step 7: Last link attach the the other half of clasp.

Step 8: Go back and cut off any sharp edges that might still be exposed.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.