Necklaces
Adorn yourself with fabulous designs.

Bracelets
Projects for every beading skill.

Earrings
Add drama to any outfit.

Men's Jewelry
Jewelry is not just for women!
See our design ideas for men.

Wedding Fashion
For the bride or for a guest - looking your best is a must

Home Accents and Crafts
Beading is not just about jewelry! See our home and craft ideas.

Have a Beading Question?
Ask Sara!

Instructions:

1. Choose your color and size of CZ and unique pair of earwires. A lighter color in a smaller size will be more delicate. A brighter color in a larger size will sparkle a little bit extra. Next, choose a complimentary color of Soft Touch Wire .010/Very Fine.
2. Use Soft Flex® Flush Cutters to cut five 3 inch strands of .010/Very Fine wire.
3. Hold five strands together and use them to string the 2mmx2mm crimp tube and 1 ear wire. Pass the wires back through the tube. Make sure you have at least 2 inches of wire remaining in each strand and use Magical Crimping Pliers to secure the crimp tube. Trim tail wires.
4. Trim the remaining wires to the following legths: 3/4", 1 1/4", 1 1/2", 1 3/4", and 2”.
5. Use the 3/4" wire to string 5 CZ beads and one 1mmx1mm crimp tube. Place the tube at the very end of the wire and use Micro Crimping Pliers to secure the crimp tube.
6. Repeat Step 4 with each remaining wire, stringing 4 beads on the 1 1/4" wire, 3 beads on the 1 1/2" wire, 2 beads on the 1 3/4" wire, and 1 bead on the 2” wire.
7. Repeat Steps 2-6 to make a second earring.

Although most projects should be fine for children over the age of 6, Soft Flex® Company suggests parental supervision. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.