Simply CZ Earrings
Designer Sara Oehler
Skill Level Intermediate

White Wire

Black Wire

Satin SilverWire


Soft Touch Wire .010 diameter - 3"
Earwires - 1 pair
2x2mm Sterling Silver Crimp Tubes - 2 pcs
1x1mm Sterling Silver Crimp Tubes - 10 pcs
2mm round CZ beads - 30 pcs


Crimping Pliers
Micro Crimping Pliers


Step 1: Choose your color and size of CZ and unique pair of earwires. A lighter color in a smaller size will be more delicate. A brighter color in a larger size will sparkle a little bit extra. Next, choose a complimentary color of Soft Touch Wire .010/Very Fine.

Step 2: Use Soft Flex® Flush Cutters to cut five 3 inch strands of .010/Very Fine wire.

Step 3: Hold five strands together and use them to string the 2mmx2mm crimp tube and 1 ear wire. Pass the wires back through the tube. Make sure you have at least 2 inches of wire remaining in each strand and use Magical Crimping Pliers to secure the crimp tube. Trim tail wires.

Step 4: Trim the remaining wires to the following legths: 3/4", 1 1/4", 1 1/2", 1 3/4", and 2".

Step 5: Use the 3/4" wire to string 5 CZ beads and one 1mmx1mm crimp tube. Place the tube at the very end of the wire and use Micro Crimping Pliers to secure the crimp tube.

Step 6: Repeat Step 4 with each remaining wire, stringing 4 beads on the 1 1/4" wire, 3 beads on the 1 1/2" wire, 2 beads on the 1 3/4" wire, and 1 bead on the 2" wire.

Step 7: Repeat Steps 2-6 to make a second earring.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.