Stunning Silver Set
Designer Sara Oehler

Skill Level Beginner

Bracelet Materials

24 gauge Silver plated Craft Wire - 1 spool
Sterling Silver Square Magnetic Clasp - 1 set
Sterling Silver Fancy Connectors - about 4 pcs
5mm Sterling Silver Beads - about 5 pcs

Chandelier Materials

24 gauge Silver plated Craft Wire - 1 spool
Sterling Silver Fancy Connectors - 2 pcs
5mm Sterling Silver Beads - 16 pcs
Round Post Earring - 1 Pair

Dangle Materials

24 gauge Silver plated Craft Wire - 1 spool
Sterling Silver Fancy Connectors - 2 pcs
5mm Sterling Silver Beads - 6 pcs
Round Post Earring - 1 Pair
Fancy Head Pins - 2 pcs

Tools

Soft Flex Chain Nose Pliers
Soft Flex Round Nose Pliers
Soft Flex Flush Cutters

Instructions


Bracelet Instructions

Finished Size 7"

Step 1: Use Soft Flex Flush Cutters to cut 2 inches of wire to form a wire wrapped loop that attaches to one half of the clasp. String 1 Sterling Silver Bead and form a wire wrapped loop that attaches to 1 connector.

Step 2: Use 2 inches of wire to form a wire wrapped loop that attaches to the other side of the connector. String 1 Sterling Silver Bead and form a wire wrapped loop that attaches to another connector.

Step 3: Repeat Step 2 three times, attaching the final wire wrapped loop to the other half of the clasp.

Chandelier Instructions

Step 1: Use Soft Flex Flush Cutters to cut 2 inches of wire. Form a wire wrapped loop that attaches to 1 Earring Post. String 1 Sterling Silver bead and form a wire wrapped loop.

Step 2: Use 2 inches of wire to form a wire wrapped loop that attaches to the previous wire wrapped loop. String 1 Sterling Silver bead and form a wrapped loop that attaches to one end of 1 connector.

Step 3: Repeat Step 1. Repeat Step 2, attaching the final wire wrapped loop to the other end of the connector.

Step 4: Use 2 inches of wire to form a wire wrapped loop that attaches to the bottom left hole of the connector. String 1 Sterling Silver bead and wrap the wire up and around the bead and around the wire above the bead.

Step 5: Repeat Step 4 attaching the wire to the left middle hole of the connector. Repeat Step 4 attaching the wire to the right middle hole of the connector. Repeat Step 4 attaching the wire to the bottom right hole of the connector.

Step 6: Repeat Steps 1-5 to create a second earring.

Dangle Instructions

Step 1: Use Soft Flex Flush Cutters to cut 2 inches of wire from the spool. Form a wire wrapped loop that attaches to 1 Earring Post. String 1 Sterling Silver bead and form a wire wrapped loop that attaches to the top hole of one connector.

Step 2: Use 2 inches of wire to form a wire wrapped loop that attaches to the bottom hole of the connector. String 1 Sterling Silver Bead and form a wire wrapped loop.

Step 3: Use 1 Fancy Head Pin to string 1 Sterling Silver bead. Form a wire wrapped loop that attaches to the second wire wrapped loop formed in Step 2.

Step 4: Repeat Steps 1-3 to create a second earring.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.