Double Heart Necklace
Designer Sara Oehler

Skill Level Beginner

Materials

Soft Flex Wire .019 Diameter, White - 2 feet
Sterling Silver Magnetic Clasp - 1 set
Sterling Silver Heart Pendants - 2 pcs
2mm x 2mm Sterling Silver Crimp Tubes - 5 pcs
1mm x 1mm Sterling Silver Crimp Tubes - 40 pcs
3mm Fire Polished Beads - 40 pcs
6mm Fire Polished Beads - 20 pcs

Tools

Magical Crimping pliers
Micro Crimping Pliers
Regular Crimping Pliers
Soft Flex Flush Cutters

Instructions

Step 1: Use Soft Flex Flush Cutters to cut two 1 foot lengths of White Soft Flex Wire.

Step 2: String one 2mm x 2mm crimp tubes and 1 Sterling Silver Heart Pendants. Pass back through the crimp tube and secure using the Magical Crimp Forming Tool.

Step 3: Use both wires to string one 2mm x 2mm crimp tube. Place the tube 3/4 of an inch from the pendant of one strand and 1 1/2 inches away from the pendant on the second strand. Secure the tube in place using the Magical Crimp Forming Tool.

Step 4: Use one wire to string one 1mm x 1mm crimp tube. Measure 1/4 of an inch from the previous tube and secure using Micro Crimping Pliers.

Step 5: String one 3mm Fire Polished Bead, one 6mm Fire Polished Bead, and one 3mm Fire Polished Bead. String one 1mm x 1mm crimp tube and secure.

Step 6: String one 1mm x 1mm crimp tube. Measure 1/8 of an inch from the previous tube and secure. Repeat Step 5.

Step 7: Repeat Step 6 three times. String one 2mm x 2mm crimp tube so that it is 3/8 of an inch from the previous tube. String one half of the clasp and pass back through the tube. Secure using Crimping Pliers. Use Flush Cutters to trim excess wire on the crimp.

Step 8: Repeat Steps 4-7 using the other strand of wire.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.