Silver Moonstone Necklace
Designer Virginia Magdaleno
Skill Level Intermediate

Materials

20 gauge Non-Tarnish Silver Soft Flex Craft Wire - 1 spool
26 gauge Non-Tarnish Silver Soft Flex Craft Wire - 1 spool
Sterling Silver Toggle Clasp - 1 set
Sterling Silver Head Pin - 1 pc
Cylinder Czech Glass Beads - Approx. 29 pcs
3mm Moonstone Rondelles - Approx. 58 pcs

Tools

Needle Nose Pliers
Cutters
Round Nose Pliers

Instructions

Step 1: Use Soft Flex® Professional Flush Cutters to cut 2 inches of 20 Gauge Silver Soft Flex® Craft Wire. Form a wire wrapped loop that attaches to one half of the clasp. String 1 Czech Glass bead and form a wire wrapped loop.

Step 2: Use 2 inches of wire to form a wire wrapped loop that attaches to the previous wire wrapped loop. String 1 Czech Glass bead and form a wire wrapped loop. Repeat entire step 12 times.

Step 3: Repeat Steps 1 and 2 using the other half of the clasp.

Step 4: Use 2 inches of wire to form a wire wrapped loop that attaches to the final wrapped loops in the chains formed in Steps 2 and 3. String 1 Czech Glass bead and form a wire wrapped loop. Use 2 inches of 26 Gauge Silver Soft Flex® Craft Wire to form a wire wrapped loop that attaches to the previous wire wrapped loop. String 1 Moonstone Rondelle and form a wire wrapped loop. Use 1 Head Pin to string 1 Moonstone Rondelle and form a wire wrapped loop that attaches to the previous wire wrapped loop.

Step 5: Use 2 inches of 26 Gauge Silver Soft Flex® Craft Wire to form a wire wrapped loop that attaches to the bottom loop of the third Czech Glass bead from the center on the right side of the necklace. String 1 Moonstone Rondelle and form a wire wrapped loop.

Step 6: Use 2 inches of wire to form a wire wrapped loop that attaches to the previous loop. String 1 Moonstone Rondelle and form a wire wrapped loop.

Step 7: Repeat Step 6 five times, attaching the final wire wrapped loop to the bottom loop of the fourth Czech Glass bead from the center on the left side of the necklace.

Step 8: Repeat Step 5, attaching the first wire wrapped loop to the top loop of the third Czech Glass bead from the center on the right side of the necklace. Repeat Step 6 twelve times, attaching the final wire wrapped loop to the top loop of the seventh Czech Glass bead from the center on the left side of the necklace.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.