|
Instructions:
- Use Soft Flex® Flush Cutters to cut three strands of .019 Soft Touch™ Wire: one 18 inch strand and 16 inch strands.
- Use all three strands to string 1 crimp tube and one half of the clasp. Pass back through the tube and secure using Crimping Pliers. Use Flush Cutters to trim excess wire at the crimp.
- Use all three strands to string one 6mm Glass Bead, 1 Bead Cap (wide end first), 1 Bead Cap (narrow end first), one 6mm Glass Bead, and 1 Citrine Nugget. Repeat entire step twice, omitting the final Citrine Nugget.
- Use one 16 inch strand of wire to string six 3mm Glass Beads. Repeat with the second 16 inch strand. Use the 18 inch strand to string 1 Citrine Nugget.
- Use all three strands to string one 6mm Glass Bead, 1 Bead Cap (wide end first), 1 Bead Cap (narrow end first), and one 6mm Glass Bead.
- Use one 16 inch strand to string six 3mm Glass Beads and 1 Citrine Nugget. Repeat with the second 16 inch strand. Use the 18 inch strand to string 1 Citrine Nugget and six 3mm Glass Beads.
- Repeat Step 5.
- Use one 16 inch strand to string 1 Citrine Nugget and six 3mm Glass Beads. Use the second 16 strand to string six 3mm Glass Beads and 1 Citrine Nugget. Use the 18 inch strand to string six 3mm Glass Beads, 1 Citrine Nugget, and six 3mm Glass Beads.
- Repeat Step 5. Repeat Steps 6-2, reversing the original sequence.
Although most projects should be fine for children over the age of 6, Soft Flex® Company suggests parental supervision. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions. |