Kyanite Necklace
Designer Virginia Magdaleno
Skill Level Beginner


Soft Touch Beading Wire .024 diameter - 1 spool
Sterling Silver Light Sapphire Toggle - 1 set
20 gauge Sterling Silver Head Pins - 3 pcs
4mm Blackened Finished Light Sapphire Squardelles - 6pcs
Kyanite Rectangles - 3 pcs
8mm Facetted Round Obsidian - 26 pcs
4mm Clear Glass Beads - 46 pcs


Crimping Pliers


Step 1: Use 1 Head Pin to string 1 Glass Bead, 1 Squardelle, 1 Kyanite Rectangle, 1 Squardelle, and 1 Glass Bead. Form a wire wrapped loop. Repeat twice to form three Kyanite dangles.

Step 2: Use Soft Flex® Flush Cutters to cut 20 inches of Soft Touch Wire.

Step 3: String one 2mmx2mm Crimp Tube and one half of the clasp. Pass back through the tube and secure using Crimping Pliers. Use Flush Cutters to trim excess wire at the crimp.

Step 4: String 10 Glass Beads.

Step 5: String 1 Obsidian and 1 Glass Bead eleven times.

Step 6: String 1 Obsidian and 1 Kyanite dangle three times.

Step 7: Repeat Step 5. String 1 Obsidian and 10 Glass Beads.

Step 8: Repeat Step 3, using the other half of the clasp.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.