|
Instructions:
- Use Soft Flex® Professional Flush Cutters to cut about 20 inches of Soft Touch™ .019 Wire from the spool.
- String one 2mmx2mm Crimp Tube and one half of the clasp. Pass back through the tube and secure using Crimping Pliers. Use Flush Cutters to cut off excess wire at the crimp.
- String one 10mm Blue Goldstone Round, one 12mm Blue Goldstone Round, and one 10mm Blue Goldstone Round.
- String 1 Bead Cap (with end that encloses bead facing outward - as it will enclose the following bead), one 12mm Round, one 10mm Round, one 12mm Round and 1 Bead Cap (with end facing inward to enclose last bead strung).
- String one 10mm Round, one 12mm Round, and 1 Small Butterfly. Pass through the Butterfl again (to give the butterfly a "floating effect"). String one 10mm Round.
- Repeat Steps 4 and 5. Repeat Step 4. String one 10mm Round bead.
- String the Large Butterfly by stringing through the top left hole (first bail), the middle hole (second bail) and the top right hole (third bail). String one 10mm Round Bead.
- Repeat Steps 4 and 5 twice. Repeat Step 4. Repeat Step 3.
- String one 2mmx2mm crimp tube and the other half of the clasp. Pass back through the crimp tube and secure using Crimping Ppliers. Use Flush Cutters to cut off excess wire at the crimp.
Although most projects should be fine for children over the age of 6, Soft Flex® Company suggests parental supervision. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions. |
Defining Excellence Then and Now - We lead our industry with simply the best products and services. We celebrate our innovative ideas and proudly inspire
