Golden Globes Bracelet
Designed by: Jessica L. Rosenfeld
Skill Level: Beginner

Materials:

• Soft Flex® Wire, .024 Diameter, Original Steel Tone - about 8 inches
• Textured 14K Gold Ball Clasp - 1 clasp
• 2mm x 3mm Gold Filled Crimp Tubes - 2 crimps
• 2 inch, 22 Gauge Gold Filled Head Pins - 39 Head Pins
• 10mm Iridescent Glass Beads - 39 beads
• 6mm Clear AB Finish Czech Glass Beads - 14 beads

Tools:

• Soft Flex® Professional Round Nose Pliers
• Soft Flex® Professional Chain Nose Pliers
• Soft Flex® Professional Flush Cutter
• EZ Bracelet Sizer - Use this tool to find your perfect fit for bracelets

Instructions:

1. Use 1 Head Pin to string one 10mm Round Glass Bead. Form a wire wrapped loop. Repeat entire step to make 39 bead dangles.
2. Use Soft Flex® Flush Cutters to cut about 8 inches of Soft Flex® .024 Wire from the spool.
3. String one 2mm x 3mm Crimp tube and the loop of one half of the clasp. Pass back through the crimp tube and secure using crimping pliers. Cut off excess wire at the crimp using Flush Cutters.
4. String one 6mm Clear Czech Glass Bead and 3 of the bead dangles formed in Step 1. Repeat this pattern 12 more times. String one 6mm Clear Czech Glass Bead.
5. String one crimp tube and the other half of the clasp. Pass back through the crimp tube and secure using crimping pliers. Use Soft Flex® Flush Cutters to cut off excess wire at the crimp.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.