Turquoise and Silver Necklace
Designed by: Jessica L. Rosenfeld
Skill Level: Beginner

Materials:

• Soft Flex® Wire, .024 Diameter, Original Steel Tone - about 23 inches
• Sterling Silver Hook & Eye Clasp - 1 clasp
• 2mm x 3mm Sterling Silver Crimp Tubes - 2 crimps
• 6mm Faceted Blue Howlite Round Beads - 24 beads
• Dyed Blue Howlite Nuggets - 12 nuggets
• 11mm Sterling Silver Smooth Barrel Beads - 11 barrels (2 pkgs)

Tools:

• Regular Crimping Pliers
• Soft Flex® Flush Cutters

Instructions:

1. Use Soft Flex® Flush Cutters to cut about 23 inches of Soft Flex® .024 Wire from the spool (more or less depending on the length you'd like).
2. String one 2mm x 3mm crimp tube and one half of the clasp. Pass the wire back through the crimp tube. Secure using crimping pliers. Use Soft Flex® Flush Cutters to cut off excess wire at the crimp tube.
3. String one 6mm Howlite round, 1 Howlite nugget, one 6mm Howlite round, and 1 sterling silver barrel eleven times (or until you reach your desired necklace length).
4. After the last bead has been strung, string one crimp and the other half of the clasp. Pass back through the crimp tube. Secure using crimping pliers and cut off excess wire at the crimp.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.