Artistic Stone Choker
Designer Sara Oehler
Skill Level Beginner

Materials

Imperial Topaz Soft Flex Wire .019 diameter - approx. 40"
Sterling Silver Spiral Hook Clasp from HandFast - 1 set
2x2mm Sterling Silver Crimp Tubes - 4 pcs
40mm Smooth Artistic Stone Rectangle Beads - 7 pcs
4mm Round Brown Czech Glass Beads - 24 pcs

Tools

Cutters
Crimping Pliers

Instructions

Step 1: Use Soft Flex® Professional Flush Cutters to cut two lengths of .019 Butterscotch Imperial Topaz Soft Flex® about 18 inches long. Since this is a choker, you'll want to measure your neck so it fits snugly. The average choker is usually about 16 inches long when finished.

Step 2: Use one strand of wire to string 1 crimp tube and one half of the clasp. Pass back through the tube and secure using crimping pliers. Use Flush Cutters to trim excess wire. Repeat entire step using the second strand of wire.

Step 3: Use 1 strand to string 2 Czech Glass Beads. Use the other strand to string 1 Czech Glass Bead.

Step 4: Use both strands to string 1 Artistic Stone.

Step 5: Repeat Steps 3 and 4 six times. Repeat Step 3.

Step 6: Repeat Step 2 using the other half of the clasp.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.